15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/02/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 1.000(25.40) 0.395(10.03) 0.260(6.60) max 0.020(0.50) 0.300(7.62) 0.118(3.00) 0. 900(22. 86)typ 0.100(2.54) allied da tec ode AHTA-2004S 1 td1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 rd1 rd2 td2 tx1 rx1 rx2 tx2 1ct:1ct 1c t: 1ct 1ct:1ct 1c t: 1ct all specifications subject to change without notice. mechanical 10/100 base t dual port transformer AHTA-2004S cw/w: 50pf typ @ 100khz, 200mv polarity: 1-20, 4-17, 6-15, 9-12, in-phase ll: 0.5h max @ 100khz, 200mv dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-2004S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -14.4 60-80mhz -12 50mhz -13.1 part number AHTA-2004S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -33 0.3-30mhz -42 60mhz isolation ?
|